Brocade Mobility 1240 Access Point Installation Guide - Manual (Page 46)

Initial configuration
3
42 Brocade Mobility 1240 Access Point Installation Guide
53-1002917-01
NOTE
If you are using the Access Point’s onboard RADIUS server, an additional
RADIUS Server Configuration
screen displays within the Navigation Panel on
the left-hand side of the screen. Use this screen to create user accounts
validated when the Access Point authenticates client connection requests to
the onboard RADIUS server.
22. Select Next. The Initial AP Setup Wizard displays the RADIUS Server
Configuration screen if the Access Point’s onboard RADIUS server is required to
validate user requests. If an onboard RADIUS server is not required, the Initial
AP Setup Wizard displays the Country/Date/Time screen to set device
deployment, administrative contact and system time information.