Brocade Mobility 1240 Access Point Installation Guide - Manual (Page 47)

Initial configuration
3
Brocade Mobility 1240 Access Point Installation Guide 43
53-1002917-01
23. Refer to the Username, Password, Description, and Actions columns to review
credentials of existing RADIUS Server user accounts. Add new accounts or edit
the properties of existing accounts as updates are required.
24. Refer to the Add On-Board RADIUS Server Users field to set the following
parameters for a user account:
• Username - If you are adding a new user account, create a username up to
X characters in length. The username cannot be revised if modifying the
user configuration. This is a required parameter.
• Password - Provide (or modify) a password between X - X characters in
length entered each time a requesting client attempts access to the AP
managed network using the Access Point's onboard RADIUS server. This is
a required parameter.
• Confirm Password - Re-enter (or modify) the password as a means of
confirming the password. This is a required parameter.
• Description - Optionally provide a description of the user account as means
of further differentiating it from others.
25. When completed, select Add User to commit a new user, Modify User to commit
a modified user or Reset to clear the screen without updating the
configuration. Selecting Reset clears the field of all entered user account
information.