Lincoln Electric IM510 RANGER 8 - Manual (Page 24)

C-2 ACCESSORIES C-2
RANGER 8
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit which includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
K892-1 Remote Control Receptacle Kit and K857
Remote Control Kit are optional for remote current
control.
TIG
Magnum™ TIG Torch
Magnum Parts Kit and Argon Gas
K930-2 TIG Module (requires K938-1 Contactor Kit)
K939-3 Control Cable (see Optional Equipment)
Optional:
• K939-1 Docking Kit
• K963 Hand Amptrol®
• K870 Foot Amptrol
• K892-1 Remote Control Receptacle Kit
• K915-1 Adapter Cable
WIRE FEED
K449 LN-25 - Includes internal contactor for across
the arc operation (no control cable). Provides “cold”
electrode until gun trigger is pressed. Includes gas
solenoid. K892-1 Remote control Receptacle Kit and
K444-1 Remote voltage Control Kit are required for
voltage control at the feeder.
LN7-K240 Contactor Kit is required.
Magnum Gun is required for gas-shielded welding.
Innershield Gun is required for gasless welding.