LT Security PTZIP772X20IR - Manual (Page 25)

User Manual of 5 Inch Network Speed Dome 24
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset.
Note: You can configure up to 256 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
to call the
preset.
Figure 4-5 Calling a Preset
Note: The following presets are predefined with special commands. You can only call
them but not configure them. For instance, preset 97 is the “Start random scan”. If
you call the preset 97, the speed dome starts random scan function.
Table 4-3 Special Presets
Special
Preset
Function Special
Preset
Function
94 Remote reboot 111 Reserved
95 Reserved 112 Start park with preset 1
96 Stop a scan 113 Start park with preset 2
97 Start random scan 114 Start park with preset 3
98 Start frame scan 115 Start park with preset 4
99 Start pan scan 116 Start park with preset 5
100 Start tilt scan 117 Start park with preset 6
101 Start panorama scan 118 Start park with preset 7
102 Stop a park 119 Start park with preset 8
103 Start park with pan scan 125 Fan ON by Temperature
Control
104 Start park with tilt scan 126 Fan ON
105 Start park with panorama
scan 127
Fan OFF
106 Start park with frame scan 130 Start pattern
107 Start park with random
scan 131 Stop pattern
108 Start park with pattern 132 Call pattern