Configuring tamper-proof alarm, 3 configuring tamper-proof alarm – LT Security PTZIP772X20IR User Manual
Page 63
User Manual of 5 Inch Network Speed Dome
62
Figure 6-44 Video Loss
2. Check the Enable Video Loss Detection checkbox to enable the video loss
detection.
3. Click
to edit the arming schedule for video loss detection. The arming
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in Section
6.6.1.
4. Check the checkbox to select the linkage method taken for the video loss alarm.
Notify surveillance center, send email and trigger alarm output are selectable. Please
Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.
5. Click
to save the settings.
6.6.3 Configuring Tamper-proof Alarm
Purpose:
You can configure the speed dome to trigger the alarm actions when the lens is
covered.