Configuring external alarm input, 4 configuring external alarm input – LT Security PTZIP772X20IR User Manual
Page 65
User Manual of 5 Inch Network Speed Dome
64
6.6.4 Configuring External Alarm Input
Steps:
1. Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Events > Alarm Input:
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed).
3. Edit the name in
to set
a name for the alarm input (optional).
Figure 6-46 Alarm Input Settings
4. Click
to set the arming schedule for the alarm input. Refer to Step 2
Set the Arming Schedule for Motion Detection in Section 6.6.1 Configuring
Motion Detection.
5. Check the checkbox to select the linkage method taken for the alarm input. Refer
to Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1
Configuring Motion Detection.