LT Security PTZIP772X20IR - Manual (Page 72)

User Manual of 5 Inch Network Speed Dome 71
Note: The Pre-record and Post-record parameters vary depending on the speed
dome model.
4. Click to edit the record schedule.
Figure 7-7 Record Schedule
5. Choose the day to set the record schedule.
(1) Set all-day record or segment record:
 If you want to configure the all-day recording, please check the All Day
checkbox.
 If you want to record in different time sections, check the Customize
checkbox. Set the Start Time and End Time.
Note: The time of each segment can’t be overlapped. Up to 4 segments can
be configured.
(2) Select a Record Type. The record type can be Normal, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm.
 Normal
If you select Normal, the video will be recorded automatically according to
the time of the schedule.
 Record Triggered by Motion Detection
If you select Motion Detection, the video will be recorded when the
motion is detected.