LT Security PTZIP772X20IR - Manual (Page 29)

User Manual of High-Definition Network Speed Dome 28
Chapter 5 PTZ Configuration
Purpose:
The section lists the system-defined presets with PTZ functions. These presets cannot
be edited but only called through a control device e.g. a DVR or web browser. To call
the system-defined presets remotely, you can choose the preset number from the list
in the PTZ control panel. Please refer to below tables for details.
5.1 Scan Mode
The corresponding scan modes and presets are as follows:
Scan Mode Description
Stop Scanning Call preset 96 to stop scanning.
Random Scan
Call preset 97. The speed dome scans
randomly.
Frame Scan
Call preset 98. The speed dome scans by
frames.
Pan Scan
Call preset 99. The speed dome scans in
the pan direction.
Tilt Scan
Call preset 100. The speed dome scans in
the tilt direction.
Panorama Scan
Call preset 101. The speed dome scans
panoramically.
5.2 Park Action
The speed dome starts a predefined scan, pattern or preset after a period of
inactivity. The corresponding park action modes and presets are as follows:
Mode Description
Park Action OFF Call preset 102 to stop park action.
Park Action with Pan Scan Call preset 103.
Park Action with Tilt Scan Call preset 104.
Park Action with Panorama
Scan
Call preset 105.
Park Action with Frame Scan Call preset 106.
Park Action with Random Scan Call preset 107.
Park Action with Pattern
Call preset 108.
Park Action with Preset
1/2/3/4/5/6/7/8 Call preset
112/113/114/115/116/117/118/119.