LT Security PTZIP772X20IR - Manual (Page 61)

User Manual of 5 Inch Network Speed Dome 60
Figure 6-42 Arming Time Schedule
3. Set the Alarm Actions for Motion Detection.
Purpose:
You can specify the linkage method when an event occurs. The following
contents are about how to configure the different types of linkage method.
Figure 6-43 Linkage Method
Check the checkbox to select the linkage method. Notify surveillance
center, send email, upload to FTP, trigger channel and trigger alarm output
are selectable.
 Notify Surveillance Center
Send an exception or alarm signal to remote management software when
an event occurs.