LumaSense Technologies InfraWin 5 - Manual (Page 10)

InfraWin 5 Manual Getting Started 10
In order to obtain simultaneous
measurements, you will need to select
the device(s) you wish to use through
the Device/ Parameters menu. You
can also load, view, and change the
pyrometer parameters for each
connected device as well as perform
other functions pertaining to each
device you have selected.
Refer to Chapter 3 for more
information on working with the
Devices/Parameters Window.
2.3 Obtaining Measurement Values
Measurement values for the selected device can be found in the Measurement (online trend)
window. This window contains three regions. In the central region, you will find the
real-time graphical representation (output trend) of the measured values for the selected device.
The two outer regions (left “input area” and right “output area”) can be opened or closed as
needed, which allows the size of the middle (graphic) area to be changed for better viewing.
Figure 2: Measurement Window
You have the option of viewing the recorded values for the current session graphically or in list
form. You can also choose to pause your measurement, change device parameters, perform
advanced measurement functions, and exit the Measurement window with or without saving a
copy of your measurement values.
When the Measurement window is open, the measured values are automatically recorded and
saved to your computer in a file named STANDARD.I12. This file is located in your Documents
and Settings\<user name>\InfraWin folder.
Figure 1: Devices/Parameters Window