LumaSense Technologies InfraWin 5 - Manual (Page 13)

InfraWin 5 Manual Working with the Devices/ Parameters Window 13
3 Working with the Devices/ Parameters
Window
3.1 Selecting Devices
1. Click the Devices/ Parameters button located on the Quick Access
Toolbar.
You can also access the Devices/ Parameters window by selecting Measurement >
Devices/ Parameters from the Menu Bar located at the top of the page, or by selecting
the Devices option found in the Measurement window, or by using the keyboard shortcut
Ctrl+D.
Note: InfraWin will automatically search all baud rates within each Com Port for all
connected devices (pyrometer, DA 6000, I/O interface, controller PI6000). Once a
device is found, it appears in the list on the left side of the screen.
2. Click to mark the checkbox next to each device you want to obtain measurements for.
Figure 5: Devices/Parameters Window
OR,
Click to mark the checkbox for a single device and click to mark the Internal temperature
checkbox for that device.