LumaSense Technologies InfraWin 5 - Manual (Page 5)

InfraWin 5 Manual General 5
1 General
InfraWin is a measurement and evaluation application which allows temperatures to be displayed,
represented graphically, saved, and subsequently evaluated. In addition, depending on the device
type, some or even all available device parameters can be set using the software.
InfraWin works with all stationary, digital IMPAC and MIKRON pyrometers in the series 5, 6, 10, 12,
50, 100, 120, 140, 320, 500, 510, 520, 530 und 2000 as well as with the digital display DA 6000 (in the
analog measuring mode). It also provides the programming platform for the program controller
PI 6000 or PI 6000-N.
1.1 About This Manual
This manual provides information you need to configure and use the InfraWin software with your
pyrometer.
This manual assumes you have a working knowledge of the Windows™ Operating System and its
conventions; including how to use a mouse, standard menus and commands, and how to open,
save, and close files. For help with any of these functions, refer to the documentation that came
with your computer.
1.2 Conventions
Section headings appear in
large Frutiger
type.
Instruction sets appear with Bold headings.
Menu, display, and keyboard options appear in Bold Title Case. (i.e., File, Open, Save, etc.)
Note: The note symbol indicates tips and useful information in this manual. All notes
should be read to effectively operate the software.
Attention: This sign indicates special information which is necessary for a correct
temperature measurement.
1.3 System Requirements
InfraWin is designed to operate on a Windows™ based computer with the following (minimum)
system components:
Windows XP
2 GHz or faster processor
1 GB Ram
Monitor with 1280 pixel width