LumaSense Technologies InfraWin 5 - Manual (Page 6)

InfraWin 5 Manual General 6
1.4 What’s New in InfraWin 5
The following is a list of improvements over the previous version of InfraWin.
Device / Parameters:
Detect available serial ports automatically with InfraWin. InfraWin can also search and list
connected devices.
Connect several pyrometers at the same time and maintain the ability to view and change
the parameters for each connected pyrometer.
View the device type (name), interface selection, and pyrometer parameters in one window.
Utilize the service protocol (access to Internet is necessary).
Measurement:
View the parameters of the connected devices directly.
Change the various settings (parameters, scaling, PC sampling rate, marking, and threshold)
during measurement operation.
Adjust measurement scaling automatically with InfraWin.
Preview the current measurement as a graphic with a list of data.
Trigger measurement externally using the I/O module.
Measure the time duration of temperature differences between warming and cooling.
Output trend / list:
View the name and serial number of the device through expanded measurement
information.
Store the output trend/list as a binary file, text, and/or picture.
Retrieve the last 20 data files (shown as a file list in "graphic", "list" and "main form").
Mailing (Access to Internet is necessary):
Error report
Comments and suggestions
Service protocol
Special Information:
There are two versions available: In the free version, a maximum of two devices can be used.
In the paid version, up to 31 devices can be used simultaneously for measurement.