LumaSense Technologies InfraWin 5 - Manual (Page 20)

InfraWin 5 Manual Working with the Devices/ Parameters Window 20
3.2.22 Limit switch (SP1)
Some instrument types are equipped with a built-in Limit switch. The switching temperature and
hysteresis of this switch can be set with InfraWin. For more information on this setting, refer to the
documentation that came with your pyrometer.
3.3 Additional Settings
3.3.1 Open/Save
The open / save buttons enable you to save customized configurations, which can then be opened
and reused at any time.
3.3.2 1 meas.
The 1 meas function shows the current measuring temperature in the pyrometer parameters
window for approximately 1 second.
3.3.3 Print
The print icon will generate a screenshot of the parameter form and allow you to send it a printer.
3.3.4 Close
The close icon will close the pyrometer parameters window.
3.3.5 Test
Clicking on the Test icon will open a window that allows you to directly communicate with the
pyrometer using the UPP (Universal Pyrometer Protocol) Data Format commands.
See Chapter 7 for information on working with the UPP Data Format commands.