LumaSense Technologies Pearl Control - Manual (Page 39)

Pearl Control Software Manual Using Calibrate Tab Features 39
6. Click the dropdown box arrow to select the desired Replacement Code.
Note: We don’t recommend using Replace Column that involves the top or bottom
pixels.
7. Click Replace Column. The Pearl Control Software will replace the pixel column with
the code specified in the Replacement Code box (Step 6).
8. Once a pixel has been replaced, the effect is only temporary unless it is saved to the
camera permanently. Click Save to Camera to save replaced pixels to the camera. This
operation will take several seconds to complete, and during this time the camera will
flicker.