LumaSense Technologies Pearl Control - Manual (Page 7)

Pearl Control Software Manual Introduction 7
1 Introduction
Pearl Control Software was designed by LumaSense Technologies, Inc., to control the Pearl
camera or core. Users can adjust video settings, capture images, and use the software to assist in
calibration. Pearl Control software is provided on a disc in a case. The latest version of the
software and PDF documentation are included on the disc.
1.1 Information About the User Manual
This manual provides all of the information you need to configure and use the Pearl Control
software.
This manual assumes you have a working knowledge of the Windows™ Operating System and
its conventions; including how to use a mouse, standard menus and commands, and how to
open, save, and close files. For help with any of these functions, refer to the documentation that
came with your computer.
1.2 Conventions
Section headings appear in
large Frutiger
type.
Instruction sets appear with Bold headings.
Menu, display, and keyboard options appear in Bold Title Case. (i.e., File, Open, Save,
etc.)
Note: Indicates tips and useful information in this manual. All notes should be read to
effectively operate the instrument.
1.3 System Requirements
Pearl Control Software is designed to operate on a Windows™ based computer with the
following (minimum) components:
Processor: 1 GhZ, 32-bit or 64-bit
Operating System: Windows XP, Windows Server 2003, Windows 7, and Windows
Server 2008
Hard Disk Memory: 1 MB for normal use
System Memory: 512 MB or more
Microsoft® .NET Framework 4 Service Pack 1