Seed Hawk Raven 2012 - Manual (Page 134)

Chapter 8
122 Seed Hawk® Viper Pro™ Installation & Operation Manual
Section Assignments
The Switchbox Setup screen is used to assign individual functions to the section switches on the Switch Box.
Place a check mark in the corresponding function column to assign that function to the section switch. This
screen may also be accessed from the main screen by touching the sections indicators above the map area
and then touching the Next button.
Note:
Changes may not be made to the Switchbox Setup options while a job is in progress. To make
changes to the options on this screen, close the active job file before accessing the Switchbox
Setup screen.
1. Touch within the Product Control area on the main screen and then touch the Section Cals area on the
CAN Controller Status screen.
The Switchbox Setup screen may be used to assign individual switchbox functions to section switches on
the Switch Box. Place a check mark in the corresponding function column to assign that function to the
section switch.
Note:
The Switchbox Setup screen may also be accessed from the main screen by touching the section
indicators at the top of the map area and then touching the Next button. Refer to Chapter 9,
Sectional Control Technology™ (SCT) for more information on the Switchbox Setup screen and
using the SCT feature with the Seed Hawk Viper Pro.
Changes may not be made to the Switchbox Setup options while a job is in progress. To make
changes to the options on this screen, close the active job file before accessing the Switchbox
Setup screen.