Seed Hawk Raven 2012 - Manual (Page 35)

3
Manual No. 016-3001-003 23
Installation, Start Up & Registration
FIGURE 2. Machine ID and Validation Code
Please note that the registration code appears on this sheet as well. This number will be necessary for
future use.
Note:
The above values are for example purposes only. If additional features (such as multi-product VRA
or weather module) have not been purchased, the registration code sheet will not be supplied.
Write down the machine ID and validation code from the Viper Pro system on a blank piece of
paper for future use.
3. Press the Next button. The Key 1 screen displays. This is the screen on which the activation key code will
be entered. Do not navigate away from this screen.
4. On a home or office computer, go to the Raven Applied Technology Division web site at
www.ravenprecision.com
Registration Code
This is the Registration Code for a Viper. Do not misplace this paper or you will not be able to register your product.
3M8828-000102-03667-0102-000L
To register your product and receive an Activation Key go to www.ravenprecision.com, select the Support tab and
choose Product Registration.
Product Options
Multi - Product (077-0171-152)
Weather Station (077-0180-030)
Order Number
XXXXXX
PO Number
XXXXXX
______________________________________________________________________________
The Viper machine id and validation code is obtained from the unit that will be registered.
Turn on the Viper and select the 'Menu' button on the main screen. Press the 'Setup' button then the 'Reg Keys'
button.
Write down the Machine ID ____________ and Validation Code ________________________. They will be
needed in the online registration process.
xxxxxxxx xxxxxxxx