Seed Hawk Raven 2012 - Manual (Page 135)

8
Manual No. 016-3001-003 123
Advanced Settings and Features
Fan Cal
The Fan RPM area displays the current RPM of the air cart fans. Touch within the Fan RPM area to display the
Fan Calibration screen and calibrate the fans.
Note:
Refer to the Fan Cal section on page 38 for more information on configuring the fan cals.
Miscellaneous Settings Area
The information displayed in the Miscellaneous area is an overview of the settings and current system status.
The Miscellaneous area displays an overview of several current system settings for the system.
Note:
Touching within the Miscellaneous area will display the Miscellaneous Settings screen.
The following information displays are for reference and monitoring purposes only:
Fan/Pump RPM Display. The fan or pump RPM is a display only. This read out displays the fan RPM if a fan
sensor is being used with a granular application or a pump RPM if a pump sensor is equipped for a liquid
application.
Speed Display. Speed is a display only. The speed shown in this area is the current ground speed of the
vehicle or the entered self test speed. See the Using the Calibration Assistance section on page 231 for
information on entering and using the self test speed feature.