Seed Hawk Raven 2012 - Manual (Page 80)

Chapter 5
68 Seed Hawk® Viper Pro™ Installation & Operation Manual
Assign or Create a Product Chain Profile
Note:
The product chaining feature is not available with ground drive Base systems.
Chain profiles allow the operator to set up and reuse product bin or tank chaining settings for multiple
applications. The chain profile stores the channels used in the product chain, the order in which to activate
those channels and the method to advance to the next channel in the product chain.
Note:
Product chain profiles should be set up before assigning recommendations to any individual
product channels during the set up process.
Chain profiles are currently only used with AgX jobs.
1. To set up or create a tank or bin chain profile, touch the drop down box at the right side of the screen.
A list of previously created chain profiles will be displayed.
2. To assign the chain profile, touch the profile name from the list and touch OK. Touch the Cancel button to
close the profile list without assigning a chain profile to the current job setup.
3. To create a new chain profile, select the Add Entry button below the profile list.
Note:
To modify an existing chain profile, select the desired profile name and touch the Edit Entry
button. The existing profile settings will be displayed and may be changed as necessary. The
profile name will not be updated automatically while editing an existing chain profile.
To remove chain profiles from the list, select the profile name and touch the Delete Entry button.