Adder Technology AdderTech SmartView XPro ADD0038/1 - Manual (Page 28)

SmartView XPro Installation and Use Page 28
To switch on the password security system:
From the main on-screen menu press F1 for MORE MENUS.
Select SETUP OPTIONS from the menu.
Move the menu bar over the SECURITY option.
Press SPACE BAR to enable security.
Press ESC to quit from the menu.
3.3 Setting an ADMIN password
The SmartView XPro supports up to 16 user profiles. The administrator of the
system can grant or deny users access to any of the connected computers and has
complete control over the setup of the system. The administrator accesses the
system via a special user named ADMIN. This profile may not be altered or deleted
from the system and has full access rights to all computers and system parameters.
Consequently it is advisable to set a password for this user.
To set a password for the ADMIN user:
From the main on-screen menu press F1 for MORE MENUS.
Select EDIT USER LIST from the menu.
Move the menu bar over the ADMIN user.
Press RETURN or ENTER to edit the ADMIN user.
Press RETURN or ENTER again to edit the ADMIN user's password.
Make sure that the password you want is displayed.
Press RETURN or ENTER to save the password.