Adder Technology AdderTech SmartView XPro ADD0038/1 - Manual (Page 34)

SmartView XPro Installation and Use Page 34
3.6.1 SECURITY
Accessed from menu: SETUP OPTIONS
Settings: DISABLED, ENABLED
With security disabled there is no requirement for users to login to the system. All
users have full access to all the connected computers and full administration rights.
With security enabled, users are required to login to the SmartView. Each user is
allocated access rights to computers by the system administrator and they are only
able to see the computers that they have access to on their on-screen menu.
3.6.2 LANGUAGE
Accessed from menu: SETUP OPTIONS
Settings: ENGLISH
This option specifies the language that is used for the on-screen menu and the
keyboard layout that is assumed for the keyboard. At the time of writing this manual
only English is available but more languages will become available for future
firmware releases.
3.6.3 HOTKEYS
Accessed from menu: SETUP OPTIONS
Settings: CRTL+ALT, CTRL+SHIFT, CTRL+ALT, ALT GR, LEFT ALT+RIGHT ALT,
LEFT CTRL+LEFT ALT, RIGHT CTRL+RIGHT ALT, DISABLED
The keyboard hotkeys are special combinations of keys that, when used together
with certain keyboard "command keys", perform special SmartView functions. For
example, pressing the hotkeys together with the "M" key will cause the on-screen
menu to be displayed on your monitor. Other hotkey combinations allow you to
query which computer you are connected to and to move the on-screen menu
around the screen. You can also use the hotkeys together with the port number to
quickly select a chosen computer without activating the on-screen menu. See
section 4.8 for full details on using keyboard hotkeys to control the SmartView. We
do not normally recommend that you disable the hotkeys but if you choose to do this
then you will need to access the on-screen menu using the SmartView's front panel
controls.