Adder Technology AdderTech SmartView XPro ADD0038/1 - Manual (Page 62)

SmartView XPro Installation and Use Page 62
Cables should be no longer than 30 metres.
NOTE - There are several common wiring specifications for 6-pin mini-DIN to 9-pin
serial adapters. If you have an adapter that has been supplied with a mouse it may
have a completely different internal wiring to that shown above and may not be
compatible with the AdderView
Recommended cables:
3-in-1 keyboard, video and mouse combination cable - For convenience,
neatness and high video quality we recommend the Adder brand 3-in-1 combination
cables. These cables are constructed with tri-coax video links to ensure that high
video quality is maintained. They also support DDC signalling and are colour coded
in PC99 specification colours for you convenience. These match the colours used on
the back of your SmartView XPro and most modern PCs. These cables are available
in various different lengths to suit your requirements. They may be purchased with or
without the adapters for AT keyboards and RS232 serial mice. Please quote the
following part codes when ordering from your supplier.
Part Code Description
VKVM-2M 3-in-1 Adder cable, 2 metres long
VKVM-2M-AT 3-in-1 Adder cable, 2 metres long with AT and serial adapters
VKVM-5M 3-in-1 Adder cable, 5 metres long
VKVM-5M-AT 3-in-1 Adder cable, 5 metres long with AT and serial adapters
VKVM-10M 3-in-1 Adder cable, 10 metres long
VKVM-10M-AT 3-in-1 Adder cable, 10 metres long with AT and serial adapters