Triton FT5000 Installation Manual - Manual (Page 53)

5 3
NMD-100 D
ISPENSING
M
ECHANISM
R
EMOVAL
/I
NSTALLATION
Figure 4. AC power cable
connection.
4. Connect the AC power cable to the
dispenser power supply. (Figure 4)
5. Slide the dispenser into the cabi-
net until the slide rail locking pin is
engaged. (Figure 5)
6. Turn the dispenser power switch
located just to the right of the power
connector to ON (I).
Figure 5. Slide dispenser into cabinet.
AC power cable connector