6 shutting down the implement, Disconnecting the mower from the tractor, Operation – Alamo GR60 User Manual

Page 115: Opera t ion

Advertising
background image

OPERATION

GR60/72 02/07

Operation Section 4-33

© 2007 Alamo Group Inc.

OPERA

T

ION

Never stand or allow another person to stand between a running Tractor and the Mower

when disconnecting the Implement from the Tractor 3-point hitch.

11.6 Shutting Down the Implement

To shut down the implement, first bring the tractor

to a complete stop. Then slow down the implement

by reducing the engine speed before disengaging

the PTO. Wait for all motion to stop before

proceeding to drive or shut down the tractor.

Park the tractor on a level surface, place the

transmission in park or neutral and apply the

parking brake, lower the attached implement to the

ground, shut down the engine, remove the key, and

wait for all motion to come to a complete stop

before exiting the tractor. OPS-U- 0016

12. DISCONNECTING THE MOWER FROM THE TRACTOR

Before disconnecting the mower, the PTO must be

disengaged and blade rotation at a complete stop.

Move the mower to a level storage location and

lower it to the ground. If the mower is not resting

securely on the ground, block the mower up

securely before attempting to disconnect it from

the tractor.

Use extreme care to keep feet and hands from

under the mower and clear of any pinch points

caused by the tractor hitch arms and mower pins.

OPS-R-0030_A

Advertising
This manual is related to the following products: