Alamo GR60 - Manual (Page 99)

OPERATION
GR60/72 02/07 Operation Section 4-17
© 2007 Alamo Group Inc.
OPERA
T
ION
• Perform scheduled lubrication as detailed in
the maintenance section.
• Ensure all decals are in place and legible.
• Ensure the driveline is securely attached to
tractor. Make sure the driveline yoke locking
colalr is securely seated in the grooves of the
PTO shaft by pushing and pulling the yoke
several times.
• Lift Type - Inspect that the 3-point hitch pins
are the proper size, correctly installed, and
secured to the tractor lift arms with retaining
pins inserted.
• Pull Type - Inspect that the hitch bolt is the
correct size, that washers are inserted between
the drawbar and hitch clevis, and the locknut is
securely tightened. OPS-R-0037_A
• Ensure deflectors and/or chainguards are in
position and not damaged. Replace worn,
broken, and missing pieces. OPS-R-0038
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should be used and
maintained in good working condition. All safety devices should be inspected
carefully at least daily for missing or broken components. Missing, broken, or worn
items must be replaced at once to reduce the possibility of injury or death from thrown
objects, entanglement, or blade contact.
(SGM-3)