Alamo GR60 - Manual (Page 84)

OPERATION
GR60/72 02/07 Operation Section 4-2
© 2007 Alamo Group Inc.
OPERA
T
ION
RHINO GR60/72 HEAVY-DUTY ROTARY MOWER
OPERATION INSTRUCTIONS
Rhino Gyro 60 and 72 (GR60/72) heavy-duty rotary mowers are manufactured with quality material by skilled
workers. These rugged mowers are engineered to cut material up to 4” in diameter and designed for
commercial, industrial, and heavy-duty agriculture conditions such as maintaining rights-of-way, shredding
crops, and cutting prunings in vineyards, orchards, and groves. The mower is equipped with front and rear
chain guards to prevent objects being thrown from the mower blades, however, no shielding is 100% effective.
All shields, guards, deflector’s, and chains equipped on the unit must be maintained on the mower in good
operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are
directly in front or to the rear of the unit.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper mower
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a rotary mower and are not necessarily of a GR60/72 cutter. Some pictures may
show shields removed for purposes of clarity. NEVER OPERATE this implement without all shields in place
and in good operational condition. The operator must be familiar with the mower and tractor operation and all
associated safety practices before operating the mower and tractor. Proper operation of the GR60/72 mower,
as detailed in this section, will help ensure years of safe and satisfactory use of the mower.
IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation. Refer to the
Torque Chart at the end of the Maintenance Section to ensure bolts are properly tightened.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND MOWER.
If you do not understand any of the instructions, contact your nearest authorized dealer for a full explanation.
Pay close attention to all safety signs and safety messages contained in this manual and those affixed to the
cutter and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
(SG-3)