In-Situ smarTROLL Multiparameter Handheld Operators Manual - Manual (Page 56)

56
11. Enter the pump information. The total system volume is calculated using the internal
pump volume, the tubing inner diameter, and the tubing length.
12. Click the right arrow button. The Purging Information screen appears.
13. Enter the pumping rate you intend to use during the test.
14. Enter the sampling rate you intend to use, or select Auto calculate sample rate
using system purge time if you want the software to assign a sample rate.
15. Enter an estimate of the drawdown you expect during the testing.
16. Click the check mark. You can save the template with the default name or enter a
different name.