In-Situ smarTROLL Multiparameter Handheld Operators Manual - Manual (Page 63)

63
12. Enter the pump information. The total system volume is calculated using the internal
pump volume, the tubing inner diameter, and the tubing length.
13. Tap the Next button to continue to the Purge screen.
14. Enter the pumping rate you intend to use during the test.
15. Enter the sampling rate you intend to use, or select Auto Calculate Samle Rate if
you want the software to assign a sample rate.
16. Enter an estimate of the drawdown you expect during the testing. It is optional to
enter notes in the Notes field.