In-Situ TROLL 9500 Operators Manual User Manual

Page 49

Advertising
background image

42

TROLL 9500 Operator’s Manual

0095110 rev. 007 01/09

TRANSFERRING FILES FROM A PDA TO A DESKTOP
PC

If Win-Situ Sync (or its earlier release, Pocket-Sync 4) is installed on
your desktop PC, file transfer can be done automatically each time the
computers are connected in ActiveSync.

To transfer files “manually” proceed as follows. NOTE THAT MICRO-
SOFT ACTIVESYNC IS NEEDED TO CONNECT THE COMPUTERS
even with an In-Situ synchronization utility installed (Win-Situ
Sync or Pocket-Sync 4).

TIP: Install Microsoft ActiveSync on the desktop PC before
the first connection to the PDA. Be sure to exit your last
Pocket-Situ session. The following procedure is performed

from the desktop PC side.

1. With the computers connected and ActiveSync running, open up

Explore on the ActiveSync tool bar.

2. Double-click on “My Pocket PC.”

3. Browse to the folder where Pocket-Situ Data is stored. On some

PDAs this will be in a folder called “Storage Card” or “SD Card.” On
the RuggedReader, look in Built-in Storage. Open the Pocket-Situ
Data folder (double-click) to display a listing of your extracted data
(.bin) files.

SECTION 6: LOGGING DATA

1

2

4

4. Right-click the file(s) you want to transfer and select Copy or Cut.

Selecting Cut will remove the data file from the PDA.

5. Open My Computer or Windows Explorer for the desktop PC and

navigate to the folder where you want to place the data file(s).
When the cursor is in the desired folder, right-click, and select
Paste.

We recommend placing the files in the following locations to ensure

that they will be displayed properly in the Data Folder branch of the
Win-Situ Navigation tree. The In-Situ synchronization utility, if used,
will put the files in the proper locations automatically.

Test data files

Data folder in the folder where Win-Situ 4 is
installed (normally, C:\Win-Situ\Data)

,OW

,OW&LOW

Calibration reports

Calibration Reports folder in the folder where
Win-Situ 4 is installed. These will be acces-
sible from Win-Situ’s Tools menu.

Advertising
This manual is related to the following products: