In-Situ TROLL 9500 Operators Manual - Manual (Page 50)

43 TROLL 9500 Operator’s Manual 0095110 rev. 007 01/09
2. The Data Folder has a node for data from each device type.
TROLL 9500 data will be listed under the TROLL 9000 “family”
device. Click the
+ beside the TROLL 9000 to expand the listing.
3. Device nodes are further subdivided by serial number. If tests from
multiple TROLL 9500s have been extracted, the serial number of
each will be displayed. Click the
+ beside the the serial number of
the unit whose data you want to view.
4. The serial number node contains the extracted tests and logged
Profiler data. Click to select the test you want to view.
1
VIEWING LOGGED DATA
2
3
4
Logged data sets from the Multi-Parameter TROLL 9500 are called
“tests.” Tests reside in the instrument until you extract them to the host
computer. Any test that has been extracted can be viewed in text or
graphical format. A test can be extracted and viewed at any time, even
while it or another test is running.
The software provides two routes to view test data:
s
View option at the end of the download. This launches the data
viewer.
s
in the Data Folder node in the Navigation tree. A connection to the
instrument is not required in order to view extracted data.
SELECTING DATA IN THE DATA FOLDER
The Data Folder appears below the Home site in the Navigation tree.
After data files have been extracted from the MP TROLL 9500 to the
Data Folder, the node can be expanded to show device type, serial
number, and extracted data files.
To view extracted test data:
1. Click the + sign beside the Data Folder to expand the listings.
SECTION 6: LOGGING DATA