KYORITSU 2009R User Manual
Page 27
̶ 25 ̶
NOTE
● If the instrument in the Data Hold mode goes into "Auto-power-
off," it will return to the normal mode.
７－３ LoHz Function
In ACV or ACA range, if frequency of the voltage or current under
test is 40Hz or lower, the display indicates "LoHz".
"LoHz" is also indicated where input is 3% of range or less.
７－４ OUTPUT Terminal (For current ranges only)
DANGER
●Never use the instrument on a circuit above 750VAC/1000VDC.
This may cause electrical shock hazard and damage to the
instrument or the circuit under test.
● Do not make measurement with the battery compartment cover
removed.
●Never apply voltage to the OUTPUT terminal.
① Attach the output plug to a connection lead so that the output
voltage can be connected to a recording device such as a chart
recorder.