Anritsu AWGN MU368060A - Manual (Page 34)

Section 6 AWGN Internal Adder Function
6-2
6.1 Product Outline
The MU368060A is capable of outputting I/Q and RF signals added with
W-CDMA uplink modulation wave and noise when mounted with both the
MU368040A and the MX368041A/B.
W-CDMA modulation wave and noise can be internally added in the fol-
lowing conditions:
Simulation Link Up Link
W-CDMA Phase 1
Chip Rate 3.84 Mcps
Maximum Code Number 1 to 6
Noise parameters that can be set at noise internal addition are shown be-
low:
Noise Bandwidth Chip Rate x1.5 or x2.0
C/N –30.0 to –20.0 dB (0.2 dB step)
–19.9 to –8.0 dB (0.1 dB step)
In addition, the MU368060A is capable of outputting I/Q and RF signals
added with a single carrier 1xEVDO modulation wave and noise when
mounted with both the MU368040A and the MU368030A+MX368033A.
1xEVDO modulation wave and noise can be internally added in the fol-
lowing conditions.
Over Sampling 8
Carrier 1
Note:
A single carrier 1xEVDO modulation wave, which is provided for
MX368033A as a standard, is satisfied with the above conditions.
Noise parameters that can be set at noise internal addition are shown be-
low:
Noise Bandwidth Chip Rate x4, x3, x2 or Tone
C/N –30.0 to +30.0 dB (0.1 dB step)