Anritsu AWGN MU368060A - Manual (Page 63)

N
7-19
NOISE
AWGN Addition
Function Sets AWGN and 1xEVDO modulation wave internal adder On/Off.
Command message NOISE a
Value of a ON : Sets the internal adder function On.
OFF : Sets the internal adder function Off.
Query message NOISE?
Response message NOISE a
Application example NOISE ON
NOISEBW
Noise Bandwidth
Function Sets AWGN bandwidth.
Command message NOISEBW a
Value of a X4 : Sets the noise bandwidth to 4 times the chip Rate.
X3 : Sets the noise bandwidth to 3 times the chip Rate.
Value of a X2 : Sets the noise bandwidth to 2 times the chip Rate.
TONE : Sets tone signal of power equivalent to noise.
Query message NOISEBW?
Response message NOISEBW a
Application example NOISEBW X4