Anritsu AWGN MU368060A - Manual (Page 36)

Section 6 AWGN Internal Adder Function
6-4
[6] Output Level
Displays [(noise power for all bands)+(total power for multiplex chan-
nels of W-CDMA modulation wave)]
[7] AWGN
Sets the AWGN internal adder function On/Off. When set to Off, the
MX368041A/B standards apply to all items. When set to On, the
MU368060A, not the MX368041A/B, standards apply.:
•
Carrier frequency range
• Number of multiplex channel
• I/Q output signal
• RF output signal
Setting item: On, Off
Initial value: Off
[8] C/N
Sets the ratio between noise power within 3.84 MHz bandwidth and
W-CDMA modulation wave power. Note that this is not the ratio for
noise power of all bands.
Setting range: –30.0 to –20.0 dB (0.2 dB step)
–19.9 to –8.0 dB (0.1 dB step)
Initial value: –20.0 dB
[9] Noise
Displays the ratio between Output Level and noise power within 3.84
MHz bandwidth.
When a warning message "Power under 0dB" is displayed, the dis-
played value does not match with actual output.
[10] Wanted
Displays the ratio between Output Level and W-CDMA modulation
wave power.
When a warning message "Power under 0dB" is displayed, the dis-
played value does not match with actual output.