Anritsu AWGN MU368060A - Manual (Page 35)

6.2 Operation When Selecting W-CDMA
6-3
6.2 Operation When Selecting W-CDMA
When W-CDMA is selected for System while setting Up Link for Simula-
tion Link, setting items for the AWGN internal adder function appear in
the Digital modulation setting screen for W-CDMA modulation.
Items not specifically mentioned can be set in the same as for the
MX368041A/B. Refer to the "MX368041A or MX368041B Operation
Manual."
6.2.1 Main screen
[1] W-CDMA Phase
Setting a value other than "1" for Phase turns the AWGN internal ad-
der function Off.
[2] Simulation Link
Setting "Down Link" for Simulation Link turns the AWGN internal
adder function Off.
[3] Chip Rate
Setting a value other than "3.84 Mcps" for Chip Rate turns the noise
internal adder function Off.
[4] Filter Mode
This item is disabled while AWGN is set to On.
[5] Maximum Code Number
Selecting a value of "7" or larger for Simulation Link turns the AWGN
internal adder function Off.