Anritsu AWGN MU368060A - Manual (Page 41)

6.4 Operation When Selecting 1xEVDO
6-9
[3] Wanted
Displays power of 1xEVDO modulation wave.
[4] Displays noise power within 1.23 MHz band.
[5] Noise Bandwidth
Sets noise bandwidth and selected in multiples of Calculated Band-
width.
When Tone is selected, the tone signal of the same power as selected
for x4 is added, but not for AWGN.
Two times offset of Chip Rate from carrier frequency is added to the
frequency of tone signal.
Setting items:
CalcBWx4, CalcBWx3, CalcBWx2, Tone
Initial value: CalcBWx4
[6] Calculated Bandwidth
Displays calculated bandwidth and fixed with1.23 MHz.