KYORITSU 2009A - Manual (Page 29)

― 27 ―
９．Optional Accessories
● MODEL 8008 (For AC current measurement only)
Multi-Tran Model 8008 is designed to increase the measuring
capability of a clamp meter. With the use of the Multi-tran, you can
not only extend current range over 3000A, but also clamp on a
large bus-bar or conductor.
①Set the function selector switch to the "∼A" position .
②As shown in the figure below, clamp KEW SNAP 2009A onto the
pickup coil of MODEL 8008.
③Clamp MODEL 8008 onto the bus-bar or conductor under test.
④Take the reading on KEW SNAP 2009A and multiply it by 10.