Revo RE8/16DVR1 - Manual (Page 11)

Digital Video Recorder
3
Chapter 2 — Installation
Package Contents
The package contains the following:
 Digital Video Recorder
 Power Cord
 User’s Manual (This Document)
 REVO Remote Pro Software CD and User’s Manual
 Rack-mount Kit
 Assembly Screws for Adding Hard Disk Drives
 Infrared Remote Control
Required Installation Tools
No special tools are required to install the DVR. Refer to the installation manuals for the other items that make up
part of your system.
Figure 2 — 16-Channel DVR rear panel.
Video Input Video Loop Through RS485 Port Alarm Input/Output
Network Port RS232C Port Audio In/Out Video Out
Factory Reset Switch Power Cord Connector
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL camera and an NTSC
monitor.
Video Input
Connect the coaxial cables from the video sources to the BNC Video In connectors.
Video Loop Through