Revo RE8/16DVR1 - Manual (Page 33)

Digital Video Recorder
25
Figure 30 — Display OSD screen.
Highlighting an item and pressing the button toggles that
item On and Off. When an item is On, there is a checkmark
in the box beside it. The following items can be turned On
or Off:
 Remote Control – The icon displays when the DVR can be
controlled by the infrared remote control.
 Zoom – The icon displays on the enlarged video.
 Network – The icon displays when the unit is connected to
a network via Ethernet. The icon displays on each camera
when audio communication is available between the DVR and a
PC running REVO Remote Pro via Ethernet.
 Freeze & Sequence – The icon displays while in the Freeze
mode, and the displays while in the Sequence mode.
 Screen Group – The number of screen group displays when the
DVR is not in the 4x4 display mode of the 16-channel DVR, and
3x3 mode of the 8-channel DVR.
 Free Space – The icon displays when the DVR is in the Recycle mode, and the percentage of available storage space displays
when the DVR is not in the Recycle mode.
 Date/Time – The current date and time information displays.
 User Name – The name of the current user logged in displays.
 Camera No. – The camera number displays at the top-left corner of each camera screen.
 Camera
Title – The camera title displays at the top-left corner of each camera screen.
 Record – The record related icons display on each camera screen.
 Audio – The icon displays on each camera screen for which the DVR can play live audio.
 PTZ – The icon displays on each PTZ camera screen.
 Text-In – The text input strings display on the screen. You can adjust the Display Dwell time (sec.) for the text input strings
displayed on the screen.
You can adjust the transparency of the setup screens by highlighting Transparency and using the Left and Right arrow
buttons.
Highlighting OSD Margin… and pressing the button displays how OSD text
will be displayed on the monitor. You can adjust the horizontal and vertical margins
so that text and icons will not be hidden beyond the edges of the monitor.
Highlight the Main Monitor tab to switch to the Sequence screen.
Figure 31 — Main Monitor screen.
Highlight the box beside Mode and press the button. You
can select between Full Sequence and Cameo Sequence.
Pressing the
SEQUENCE
button causes the DVR to sequence
cameras, and the DVR can sequence cameras in two modes:
“Full” and “Cameo”. In the Full mode, the DVR sequences
through the cameras and displays them full screen. In the
Cameo mode, the bottom right window in a multi-screen format
sequences through the cameras.
NOTE: Any cameras that are Off, have lost video or are set
to Covert (unless the user has authority to view
covert cameras) will be excluded from the Cameo
sequence.
You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts
(pages) so that all the cameras will be displayed. You can also set up the DVR to display one camera or a group of
cameras all the time while cycling through the remaining cameras in a “cameo” window. This can be done with one
camera displayed full screen while displaying the cameo window as a PIP (picture in picture), or displaying the cameras
in a grid pattern with the bottom right window as the cameo.