Revo RE8/16DVR1 - Manual (Page 71)

Digital Video Recorder
63
⑥
Click the camera button to select the camera to be viewed.
⑦ Click the to adjust the brightness, contrast, saturation and hue of monitoring image.
⑧ Click the to control pan, tilt and zoom of the camera from a remote site.
⑨ Click the to control alarm out devices at the remote site.
⑩ Click the to save the current image as a bitmap or JPEG file format.
⑪ Click the to set up the image drawing mode and OSD display. You can adjust the display speed by changing
the image drawing mode, and select OSD information to be displayed on the screen.
⑫ The event status window at the bottom displays a list of events that were detected from the remote site.
⑬ Selecting a camera on the screen and clicking the right mouse button displays the text menu screen.
 Change Camera Title: Changes the camera name.
 Enable Audio: Enables audio communication with the remote site. When the audio control
panel displays, click the to send audio to the connected remote site and click the button
again to stop sending audio. Click the to monitor live audio from the connected remote
site through the attached speaker and click the button again stop monitoring live audio.
Clicking both and allows two-way communication. Clicking the disables audio
communication.
 Aspect Ratio: Changes the image aspect ratio.
 Deinterlacing: Using a deinterlace filter for interlaced video enhances image display quality
by eliminating horizontal scan lines and noise in areas with motion.
 Anti-Aliasing Screen: Enhances image display quality by eliminating stair stepping
(aliasing) effects in the enlarged image.
NOTE: A camera name change in the Web Watch mode does not affect the camera name set up on the remote
site. Leaving the Camera Title blank causes the camera name set up on the remote site to display.
The icon will display on each camera screen when audio communication is available between the
REVO Remote system and a DVR.
Web Search Mode
Remote Search is a remote web search program that allows you to search recorded video on the remote DVR.
NOTE: The remote site connection in the Web Search mode will automatically be disconnected if there is no
activity for 30 minutes.