Revo RE8/16DVR1 - Manual (Page 54)

User’s Manual
46
To use the front panel buttons, press the Left and Right arrow buttons to pan left and right. Press
the Up and Down arrow buttons to tilt the camera up and down. Press the button to zoom in,
and press the button to zoom out. You can use the and buttons to focus the image.
Figure 63 — PTZ Select Camera menu.
You can save camera position settings as “presets” so that you can go directly to desired views. Position the mouse
pointer at the bottom of the screen, and the PTZ toolbar will display.
Once you have the camera at the desired settings, click the in the PTZ toolbar,
and the Set Preset dialog box will appear. Select the number you want to assign
to the preset and press the
button. Use the virtual keyboard to enter the preset
name.
Click the in the PTZ toolbar to load the PTZ preset and the Move to Preset
dialog box will appear. Select the desired preset and press the
button to load
the preset.
NOTE: The Preset menu also can be displayed by clicking the right mouse
button on the screen while in the PTZ mode.
< Set Preset > < Move to Preset >
Figure 64 — PTZ Preset menu.
While in the PTZ mode, pressing the
MENU
button and selecting (Advanced PTZ) in the menu
displaying at the top of the screen displays the Advanced PTZ menu.
Set the feature you wish to control by selecting it from the menu. Refer to the camera manufacturer’s
instructions for the proper settings. Depending on the camera specifications, some features may not
be supported.
You can use a mouse for convenient PTZ control. Click the left mouse button on the image and move that image in
the direction you want to by dragging the mouse. Use the mouse wheel to zoom in and out. Position the mouse pointer
at the bottom of the screen, and the following PTZ toolbar will display.
Clicking on the left side exits the toolbar. If you want to display the toolbar again, position the
mouse pointer at the bottom of the screen. Change the toolbar location by clicking the empty space
on the left side of the toolbar and drag it to where you want it located on the screen. Use the arrow
buttons on the toolbar to pan or tilt the camera in the direction you want. The other controls on the
toolbar perform as described below:
Zoom In / Out
Focus Near / Far
Iris Open / Close Set / Load Preset