AMX Radia Eclipse 4-Channel Dimmer Module RE-DM4 - Manual (Page 33)

Radia Lighting System Configuration Pages
25 RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
Radia Lighting System Configuration Pages
Overview
The AMX Radia Web pages provide a simple interface from which an installer/user may perform lighting
system configuration and setup tasks without needing access to an AMX touch panel. The web pages reside on
the AMX master and may be accessed through a compatible Web browser. The AMX Radia configuration web
pages were designed with setup functionality in mind and not everyday control.
The browsers currently supported by the Radia Web pages are Internet Explorer version 6.0 and 7.0 and
Mozilla Firefox version 2.0.0.3.
Lighting System Link
In order to access the configuration web pages for the AMX Radia, open your computer's browser and point it
to the AMX master containing the loaded Duet module by typing the following URL:
http://xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address of the AMX master. This opens the Master Configuration Manager
page (FIG. 29).
Once the page is loaded:
1. Click on the System menu button at the top of the page.
2. Click the Manage Device tab
3. Expand the Lights node in the Device Configuration Pages section by clicking on the link.
4. Click on the AMX Radia RE-DM4,Radia RE-DM6 - 41001:1:0 link.
Use of the AMX Radia Web Pages requires the use of the Radia Duet Module.
NetLinx code or a terminal may also be used to configure the lighting system if use of
the module is not an option.
FIG. 29 Master Configuration Manager
The AMX master must be running firmware v3.21.343 or higher for the Radia Eclipse
configuration pages to work as expected.