AMX Radia Eclipse 4-Channel Dimmer Module RE-DM4 - Manual (Page 63)

Appendix A: AMX Lighting Curves
55 RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
FIG. 45 shows the low-voltage output of the RDM-HDC module. The voltage range is from 0 to 9 VDC when
attached to test ballast. This curve can be used with 0-10 VDC dimming ballasts.
0-10VDC Curve (3)
FIG. 46 shows the output voltage of a dimmer. It has a smooth taper and a cut off point of 25 volts. This curve
will shrink incandescent dimming range 25%.
 Relay turn on level = 1%
 Dimming Range = 30 - 115 VAC.
FIG. 44 Curve 2 at 240 VAC
FIG. 45 Curve 2 voltage output in volts DC
FIG. 46 Curve 3 voltage output in volts RMS