AMX Radia Eclipse 4-Channel Dimmer Module RE-DM4 - Manual (Page 46)

AMX RADIA Lighting Programming
38 RE-DM4 and RE-DM6 RADIA Eclipse Dimmer Modules
Stop Ramping Dimmer
This function stops the specified dimmer(s) from ramping.
This command will also stop the ramping of dimmers that are being ramped by the PU and PD commands.
Ramp Active Preset Up
This function ramps up the currently active (last recalled) preset until the ramp is stopped or all dimmers in the
preset reach 100%. Note this function uses the terminating carriage return (ASCII 13) to stop ramping,
therefore the carriage return must not be sent with the string.
The ramp rate for this function is the default ramp time as established by the 'RT' command.
 Only dimmers that are assigned a level greater than 0 in the preset are ramped.
 Dimmers with a level of 0 and Undefined dimmers are not affected by the PU command.
Ramp Active Preset Down
This function ramps down the currently active (last recalled) preset until the ramp is stopped or all dimmers in
the preset reach 0%. Note this function uses the terminating carriage return (ASCII 13) to stop ramping, so the
carriage return must not be sent with the string.
The ramp rate for this function is the default ramp time as established by the 'RT' command.
Stop Ramping Dimmer
String: <dimmer>S
Response: <dimmer> STOP (if one dimmer specified)
GROUP STOP (if multiple dimmers specified)
ALL STOP (if all ('A') dimmers specified)
Examples: SEND_STRING Radia,"'1S',13" Stop ramping dimmer 1
Response: "12,'01 STOP',13,10,'?'"
SEND_STRING Radia,"'2-4S',13" Stop ramping dimmers 2-4
Response: "12,'GROUP STOP',13,10,'?'"
SEND_STRING Radia,"'AS',13" Stop ramping all dimmers
Response: "12,'ALL STOP',13,10,'?'"
Ramp active preset up
String: PU
Response: PRESET <preset> RAMPING UP
Examples: SEND_STRING Radia,'PU' Ramp preset up
Response: "12,'PRESET 001 RAMPING UP',13,10,?"
SEND_STRING Radia,"13" Stop ramping
Response: "12,'PRESET 001 RAMP STOPPED',13,10,'?'"
Ramp Active Preset Down
String: PD
Response: PRESET <preset> RAMPING DOWN
Examples: SEND_STRING Radia,'PD' Ramp preset down
Response: "12,'PRESET 001 RAMPING DOWN',13,10,?"
SEND_STRING Radia,"13" Stop ramping
Response: "12,'PRESET 001 RAMP STOPPED',13,10,'?'"