Airedale Air Cooled Condensers R410A - Manual (Page 7)

Condensers CR12
– CR105
Condensers
7
Installation & Maintenance : 6680953 V1.2.0 02/2013
General Description
CONSTRUCTION Unit cabinets are manufactured from galvanised sheet steel coated with epoxy baked
powder paint to provide a durable finish.
Standard unit colour is Light Grey (RAL 7035).
Dual position fixing legs are supplied attached to the unit via captive bolts and shake
proof washers.
Horizontal Air Discharge As standard, unit legs are attached and delivered in the horizontal air discharge mode as
are the isolator and fan speed controller.
The legs attached to the top of the unit are for lifting and stacking and may be removed
and stored safely if not required.
IMPORTANT Only 2 units may be stacked together.
Vertical Air Discharge As standard, unit legs are attached and delivered in the horizontal air discharge mode
and can be repositioned on site to offer vertical air discharge mode, refer to
Installation
Data , on page 8 for details.
IMPORTANT To ensure the unit isolator and fan speed controller are in the correct orientation,
when vertical air discharge is required please specify at order.
STANDARD FEATURES The unit features as standard:

Low noise axial flow sickle bladed fan

Mains electric isolator

Condenser coil

Filter drier (loose)

Head pressure control (variable) (supplied with unmatched unit or supplied with
matched Airedale indoor unit)

Holding charge of inert gas
OPTIONAL EXTRAS
Factory Fitted 
Electronically commutated (EC) fan

Short case axial fans

Head pressure control - On/Off

Coil guards

Corrosion resistant coated coils
Loose

Shut off valves

Fan guide vanes (ac fan only)