Installation of orion integral commercial endpoint, License requirements, Installation tools and materials – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual

Page 5: Label information

Advertising
background image

Installation Manual

LICENSE REQUIREMENTS

This device complies with Part 15 of FCC Rules Operation of this device is subject to the following conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation

IN ACCORDANCE WITH FCC REGULATIONS, “CODE OF FEDERAL REGULATIONS” TITLE 47, PART 2, SUBPART J, SECTION

1091, TRANSMITTERS (ENDPOINTS) PASS THE REQUIREMENTS PERTAINING TO RF RADIATION EXPOSURE. HOWEVER,

TO AVOID PUBLIC EXPOSURE IN EXCESS OF LIMITS FOR GENERAL POPULATION (UNCONTROLLED EXPOSURE), A 12

CM DISTANCE BETWEEN THE TRANSMITTER (ENDPOINT) AND THE BODY OF THE USER MUST BE MAINTAINED DURING

TESTING.
No FCC license is required by a utility to operate an ORION meter reading system
This device complies with Industry Canada license-exempt RSS standard(s) Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device Le présent appareil est conforme aux CNR d'Industrie Canada applicables

aux appareils radio exempts de licence L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement
Any changes made, but not approved by Badger Meter, can void the user’s authority to operate the equipment

INSTALLATION TOOLS AND MATERIALS

• Use magnetized screwdrivers:

◊ 1/4" flat screwdriver
◊ 3/16” flat screwdriver

OTEE:

N

If a battery powered driver is used, ensure torque maximums are not exceeded (usually 15 inch-pounds)

• Badger Meter handheld

LABEL INFORMATION

Certification markings are noted on the product label Label markings include:
• Serial number and bar code plus product description
• FCC identification
• Certification markings

Page 5

July 2014

Advertising
This manual is related to the following products: