Milestone Remote Client 3.5 - Manual (Page 10)

Milestone XProtect Remote Client 3.5; User’s Manual
Logging In
the Remote Client you will be asked to
g in:
ave
gged in before. Lets you reuse previously
dress: Type the URL or IP address specified by your system administrator. This will
rt: Internet connections may use different ports for different purposes. Specify the
• uthentication: Select between different methods of authentication (i.e. the process of
which you will be authenticated through your current
ndows login, and do not have to specify any user name or password. This is the
u
nd password.
• sername: Type your user name as specified by your system administrator. The user
anda
•
When accessing
lo
1. Specify your login information in the following
fields:
• Previous Logins: Only available if you h
lo
specified login details (except any password,
which you must always type yourself). This can greatly speed up the login process.
• Ad
typically be the same URL or IP address you used if connecting to the Remote Client
through a browser, although it may occasionally be a different one.
• Po
port number, your system administrator has asked you to use when logging in to the
Remote Client. In most circumstances, port 80 is used.
A
verifying that you are who you claim you are). Consult your surveillance system
administrator if in doubt about which authentication method to use.
o
Windows (current user), with
Wi
default authentication method, i.e. the method which is automatically used unless
you select another method.
o
Windows, with which you will be authenticated through your Windows login, but yo
will need to type your Windows user name a
o
Basic, with which you will be authenticated through a user/password combination
defined on the surveillance system server.
U
name is case-sensitive, i.e. there is a difference between typing, for example, am
and Amanda.
Password: Type your password as specified by your system administrator. The
password is case-sensitive.
Tip: The vast majority of Remote Client users will always log in to the s
a
ame address
nd port number. However, if you occasionally log in to different addresses and ports, or
w
Browse and Setup. The
ameras, the Browse tab is used for browsing
for configuring the Remote Client.
log in with different user names, the Previous Logins list lets you select your previously
specified logins, in which case all you have to do is specify your password.
2. Click the Login link. After a short wait, the Remote Client
Client window has three tabs: Live,
indow will open. The Remote
Live tab is used for viewing live
video from c
recorded video from cameras, and the Setup tab is used
Note: Depending on your user rights, you may not be able to access all three tabs.
www.milestonesys.com Page 10 Accessing the Remote Client