Milestone Remote Client 3.5 - Manual (Page 7)

Milestone XProtect Remote Client 3.5; User’s Manual
Introduction
The Remote Client provides users with access to the surveillance system. It lets users access
multiple servers at a time, allowing user access across systems.
The Remote Client does not offer nearly as many features as the Smart Client (see separate
manual). However, the Remote Client is accessed through a browser, and run from the surveillance
system server; this eliminates the need for installing any client software.
Example of the Remote Client, displaying video from
16 cameras
System Requirements
Operating System Microsoft ® Windows ® XP Professional (32 bit or 64 bit*) and Windows
Server 2003 (32 bit or 64 bit*), Windows Vista ® Business (32 bit or 64
bit*), Windows Vista Enterprise (32 bit or 64 bit*) and Windows Vista
Ultimate (32 bit or 64 bit*). If using Windows Vista, the server on which
the Remote Client is running must be added as a trusted site in your
browser.
CPU Intel ® Pentium ® , 2.4 GHz or higher.
RAM Minimum 256 MB (512 MB recommended for larger views, 1 GB
recommended on Microsoft Windows Vista).
Network Ethernet (100 Mbit or higher recommended).
Graphics Adapter AGP or PCI-Express, minimum 1024 x 768 (1280 x 1024 recommended),
16 bit colors.
Hard Disk Space Minimum 10 MB free.
Software DirectX 9.0 or newer.
* Running as a 32 bit service/application.
Tip: To check which DirectX version is installed on a computer, click Start, select Run..., and
type dxdiag. When you click OK, the DirectX Diagnostic Tool window will open; version information
is displayed near the bottom of its System tab. Should the server require a DirectX update, the
latest versions of DirectX are available from
http://www.microsoft.com/downloads/ .
www.milestonesys.com Page 7 Introduction