Milestone Remote Client 3.5 - Manual (Page 14)

Milestone XProtect Remote Client 3.5; User’s Manual
• If the Views section contains one or more expandable folders labeled [Private] ..., you
have already created one or more views in private groups.
Which Types of Groups Can You Create Views in?
Depending on your user rights, you may be able to create and edit views in the following types of
groups:
• Private and shared
• Private, but not shared
• Shared, but not private
• None at all (in which case you simply rely on views created by others and placed in shared
groups)
Typically, only a few people in an organization are able to create and edit views in shared groups.
For example, the surveillance system administrator may create and maintain a number of views
and place them in shared groups: When Remote Client users log in, the views placed in the shared
groups will automatically be available to them, and the users will basically not need to create
further views unless they want their own views in private groups.
To quickly determine which types of groups your user rights permit you to create and edit views in,
do the following:
1. Select the Remote Client’s Setup tab.
Note: Particular user rights may be required in order to access the Setup tab. If you are
not able to access the Setup tab, you are not able to create views.
2. On the Setup tab, look at the Views section. Group folders to which you do not have access
will be indicated by padlock icons.
Example: The user is able to create and edit views
in private groups, but not in shared groups. Note
the padlock icon on the shared group folder.
Consult your system administrator if in doubt about your user rights.
Creating Views in Private Groups
To create your first view in a private group, you first create a group, and then create the required
view within the group.
If you have created views in private groups before, you may create new views in existing private
groups, or you may create a new private group for the view.
Note: Views are created on the Remote Client’s Setup tab. Particular user rights may be required
in order to access the Setup tab.
www.milestonesys.com Page 14 Creating Views